Mobile Concrete Batch Plant
SPECIFICATIONS
Silo
Cement Weight Hopper
Water Tank
Admixture Pumps
50mm Water Pump
20mm Pressure Pump
Rotary Screw Air Compressor
6 cylinder Cummins Generator
8 cubic metres
Length 20 metres
Width 3.5 metres
Height 5 metres plus Hand
Rails and Filter
40 cubic metres per hour
50 tonne
3 tonne
9,600 litre
2 x 0.75kw
1 x 2.2kw
1 x 3kw
1 x 7.5kw
1 x 90kva
Weigh Hopper Capacity
Batching Capacity
Approximate area to position batch plant and stock piles of sand and aggregate would be a minimum of 3,000 sq metres.
The mobile batch plant is permanently mounted on a tri-axle suspension semi trailer chassis and is road registered to travel on NSW roads under permit. The plant is constructed to the NSW Mines Specifications so as to be able to operate in mines and quarries throughout Australia.
SECOND SILO OPTION
SPECIFICATIONS
Silo
Discharge Auger
Discharge Auger
Electric Load Cells with remote indicator
Length 16 metres
Width 3.5 metres
Height 4.6 metres plus Hand Rails and Filter
60 tonne
1 x 10kw
1 x 7.5kw
4 x
If required a second 60 tonne portable silo can be used for cement or fly ash storage.
The silo sits on load cells and is able to direct discharge into the agitator via the mobile plant feed hopper or into the cement weight hopper. The silo’s discharge augers plug directly into the electricity supply on the mobile plant.
The silo is permanently mounted on a tri-axle suspension semi trailer chassis and is road registered to travel on NSW roads under permit. The silo is constructed to the NSW Mines Specifications so as to be able to operate in mines and quarries throughout Australia.